Articles / 3 min read
Thar coal Phase III is running: can factories buy Thar coal?
Can factories buy Thar coal? Not on a regular basis, and a Punjab kiln or boiler would not want much of it if they could. Phase III of Thar Block II opened in early October 2026 and lifted output from 7.6 to 11.2 million tonnes a year, but nearly all of it feeds power plants.

Where the extra coal goes
The added output goes mainly to the 660 MW Lucky Electric plant near Karachi, which takes about 3.6 million tonnes a year. SECMC, the mining company, has said it is exploring industrial sales and that Thar lignite delivered to Karachi is 8 to 10% cheaper than imported coal.
There is no regular market where a kiln owner in Gujranwala or a mill in Faisalabad can order a truck of Thar coal the way they order from Quetta. If a supplier offers it, ask for the heat value, moisture and ash on a lab certificate with the basis stated, the price delivered to your gate, the lot size, and whether your boiler or kiln maker approves lignite.
Why the heat is the problem
Thar coal is lignite, the youngest and softest kind. It carries roughly 2,500 to 3,000 kcal/kg, and a published study of Thar Blocks II and VI reported mean moisture of about 44 to 48%. Balochistan coals on our sheet run from 5,000 to 6,500 kcal/kg with 6 to 9% moisture.
So you need two tonnes or more of Thar lignite for the heat of one tonne of Duki lump, and freight is charged on all of it, water included. That is also why the 8 to 10% claim needs care: it compares with imported coal delivered to Karachi, not with heat at your site, and a tonne price that is 8% lower can still be dearer per million kcal. Divide the delivered price by the heat, as in our coal price comparison calculator, and if the supplier cannot give you that, you do not have a quote.
| Fuel | Heat (kcal/kg) | Moisture | Tonnes for the same heat |
|---|---|---|---|
| Thar lignite, low estimate | 2,500 | about 44 to 48% | 2.4 |
| Thar lignite, high estimate | 3,000 | about 44 to 48% | 2.0 |
| Duki lump | 6,000 | 7% | 1.00 |
| Chamalang lump | 6,300 | 6% | 0.95 |
| Sor Range | 6,500 | 6% | 0.92 |

The rail link and what it will not fix
The ECC approved Rs 10 billion for a Thar coal rail link in early October. That would cut the cost of moving lignite towards Karachi, but not the heat problem. A tonne of lignite carries about half the heat of a tonne of Balochistan coal, and the further from Thar, the worse that sum gets.
Why it rarely suits a bhatta or a Punjab boiler
A zigzag kiln needs coal that gives steady, high heat in small feeds. Wet, low-heat fuel means feeding much more, and it steams and smokes before it burns, which is what EPA inspectors look for in smog season. Lignite also dries and crumbles after it is dug and heats up in a heap faster than hard coal, so it suits plants close to the mine.
Most Punjab boilers were built for coal of 5,000 kcal/kg and up, or for gas. Lignite would need different feeding, grates and drying. A plant built around it is another matter.
What is available is Balochistan coal at a known grade in 2 to 3 days, such as Sor Range at about 6,500 kcal/kg and about Rs 39,250 a tonne ex-Quetta, or Sindh coal from the mines near Hyderabad for some Karachi and Hyderabad buyers. Prices are indicative and confirmed when you contact us on 0349 4384514.
Prices are indicative, per tonne, excluding sales tax, and change week to week. See today's sheet or ask us for a confirmed price.



