Articles / 6 min read
Coal for sugar mills: the 2026-27 crushing season, bagasse gaps and which grade to buy
Coal for sugar mills is a stand-by fuel: a mill burns its own bagasse while it crushes and buys coal for the gaps, which are boiler start-up, days when cane runs short, and off-season power from a co-generation plant. A low-ash grade such as Sor Range suits a bagasse-fired boiler best, and one 25-tonne truck of it carries about as much heat as 87 tonnes of bagasse. This season's start is contested: Punjab and Sindh have both set 15 November 2026, while the mills' association said on 12 November that it would not crush before December.

The 2026-27 crushing season: dates set and dates disputed
A sugar mill's fuel plan hangs on the day the cane starts coming in, because that is the day bagasse starts coming out of the mill. These are the dates on record as of 16 November.
| Who | Date | What was said |
|---|---|---|
| Punjab government | 15 November 2026 | Notification issued at 9 pm on 15 November: mills to start buying cane from 15 November. Of 47 mills in Punjab, 41 are working. |
| Sugar mills, North Zone | By 30 November | Mills need at least 15 days to be fully running; boilers and heavy machinery take about two weeks. They read the 1950 Act as allowing a start by 30 November. |
| Pakistan Sugar Mills Association | Not before December | General body decision reported on 12 November, citing about 1.1 million tonnes of unsold sugar and asking to export 400,000 tonnes more. |
| Sindh cabinet | 15 November 2026 | Fixed at the cabinet meeting of 3 November. |
| Sindh Abadgar Board | 20 November 2026 | Growers' demand on 8 November, with Rs 647 a maund for cane. |
When a sugar mill needs coal
The federal co-generation policy of January 2008 set out the pattern most mills still follow: bagasse is the main fuel during crushing, November to February, and coal, imported or local, from March to October, so a power plant can run 300 to 330 days a year. The same paper says storing bagasse is uneconomic, which is why a second fuel is needed at all, and it lets bagasse and coal be burned in any proportion the plant needs.
Start-up is the other gap. Before the first cane is crushed there is no fresh bagasse, yet the boilers must be heated and the plant run up. Dawn reported in November 2005 that Seri Sugar Mills in Sindh heated its boiler from 23 October to 2 November, then stopped when cane came in short, and that mills could not afford furnace oil in place of bagasse. This year the North Zone mills put the run-up at about two weeks.
- Start-up: heating boilers and running up the plant before bagasse is coming off the mills.
- Short cane days: when cane comes in slowly at the start or during a price dispute, the boilers still need steam.
- Bagasse running short of what the boilers burn, which comes sooner on old low-pressure boilers.
- Off-season power: a co-generation plant selling to the grid from March to October.

Bagasse against coal: heat, ash and price
The 2008 policy gives bagasse a net heat value of 1,850 to 1,900 kcal/kg, about 4% ash and no sulphur. Coal on our price sheet runs from 5,000 to 6,500 kcal/kg, so each tonne of coal does the work of roughly three tonnes of bagasse. Our figures are typical heat values and the bagasse figure is net, so the true gap is a little smaller than these sums suggest.
Per unit of heat, the better coals leave no more ash than bagasse does. Sor Range at 9% ash and 6,500 kcal/kg leaves about 14 kg of ash per million kcal, against about 21 kg for bagasse. Fines leave far more. What coal adds that bagasse never had is sulphur, 3% even on our lowest grade.
On price, bagasse wins while a mill has its own. Dawn put local bagasse at Rs 5,000 to 8,000 a tonne in May 2024, which is Rs 2,667 to 4,267 per million kcal. Sor Range delivered to Lahore is Rs 52,250 a tonne this week (Rs 39,250 at Quetta plus Rs 13,000 freight), or Rs 8,038 per million kcal. Coal is the fuel for the gaps, not a replacement.
| Fuel | kcal/kg | Ash % | Sulphur % | Ash kg per million kcal | Rs per million kcal |
|---|---|---|---|---|---|
| Bagasse (2008 policy; Dawn price, May 2024) | 1,875 | 4 | 0 | 21 | 2,667 to 4,267 |
| Sor Range, delivered Lahore | 6,500 | 9 | 3 | 14 | 8,038 |
| Chamalang lump, delivered Lahore | 6,300 | 11 | 4.5 | 17 | 8,413 |
| Duki lump, delivered Lahore | 6,000 | 15 | 4.5 | 25 | 8,625 |
| Coal fines, delivered Lahore | 5,000 | 25 | 5 | 50 | 7,600 |
How much coal per 1,000 tonnes of cane
A Pakistani case study from CDKN puts bagasse at about one tonne for every three tonnes of cane. On 1,000 tonnes of cane that is about 333 tonnes of bagasse, or 625 million kcal at 1,875 kcal/kg. Sor Range at 6,500 kcal/kg carries the same heat in about 96 tonnes.
Few mills need to replace all of it. If the bagasse falls 10% short, the gap on 1,000 tonnes of cane is about 10 tonnes of Sor Range, and one 25-tonne truck covers the shortfall on about 2,600 tonnes of cane. Multiply by your own daily crush to see how many days a truck lasts.
Boiler pressure changes the sum. The same study says a low-pressure plant at 23 bar uses about 11 tonnes of steam for each megawatt it makes, against 5.5 tonnes at 66 bar, and that high-pressure plants burn 46% less bagasse for the same power. A mill on old low-pressure boilers runs out of bagasse sooner and is the likelier coal buyer.
- 5% short4.8 t
- 10% short9.6 t
- 20% short19.2 t
- All bagasse replaced96 t
Heat for heat at the same boiler efficiency. Bagasse at one third of cane (CDKN) and 1,875 kcal/kg net (2008 policy); coal at the sheet's typical value.
Which coal grade fits a bagasse-fired boiler
A furnace built for bagasse is built for a light, wet fuel with little ash. Coal burns hotter and denser, so the safe course is to blend it into the bagasse rather than fire it alone, starting with a small share and watching the grate and the stack. Sor Range is the grade we would send first: it has the lowest ash and sulphur on our sheet and comes as lump 50 to 150 mm or mixed 0 to 100 mm. Chamalang lump is the next choice where the feeders take lump.
Keep coal fines out of a bagasse boiler unless it was built for them: they carry the most ash for the heat and can drop through a grate made for fibre. Ask your boiler maker for the top size its grate and feeders accept before you order, and check the clinker risk if your furnace runs hot. Our guide to the best coal for boilers goes through grate and size in more detail.
Buying coal for the crushing season
One 25-tonne truck of Sor Range to Lahore costs Rs 1,306,250 before sales tax: Rs 39,250 a tonne at Quetta, plus Rs 13,000 a tonne road freight, times 25. If your mill is not near Lahore, ask for freight to your own gate; the price sheet shows the Quetta price every week.
With the start date still argued over, it makes sense to have one truck on the ground for start-up and the first short-cane days, and to order the next against your crush. Before a truck loads, the man at the mine sends a video of the coal and the truck number, and lumps with a band of stone through them are left out, so you can see what is coming before it leaves Balochistan. Send your daily crush and boiler type on the contact page and we will work out a loading plan.
Questions people ask
Does the sugar mill pay sales tax on coal?
Yes, 18% on local coal, and a registered mill can claim it back as input tax if it pays from its business bank account. The coal sales tax calculator works it out on any price.
Prices are indicative, per tonne, excluding sales tax, and change week to week. See today's sheet or ask us for a confirmed price.



