Articles / 3 min read
Gas, coal or furnace oil: what steam costs a factory in 2026
Steam cost comes down to one formula: cost per million kcal = fuel price ÷ (calorific value × boiler efficiency). Fill in this week's price for gas, coal and furnace oil and the cheapest fuel for your boiler is clear in ten minutes.

The formula and its units
Compare fuels by what a million kilocalories of useful heat costs. Coal is priced per tonne and its heat is in kcal per kg, so multiply the kcal by 1,000 to get kcal per tonne. Efficiency is the share of the fuel's heat that ends up in the steam, as a decimal: 75% is 0.75. Our boiler coal consumption calculator and fuel cost calculator do the same sum.
Typical ranges for reasonably kept industrial boilers, not guarantees: gas 80 to 90%, furnace oil 80 to 88%, chain-grate coal 70 to 80%, a good FBC boiler somewhat higher. Coal loses efficiency to unburnt carbon in the ash and to its own moisture, which is why dry, sized coal matters so much in a boiler.
Our coals through the formula
Duki lump delivered to Punjab at about Rs 51,750 a tonne, 6,000 kcal/kg, in a chain-grate boiler at 75% gives 4,500,000 kcal of useful heat per tonne, or about Rs 11,500 per million kcal. The chart does the other grades with efficiencies we have assumed inside the 70 to 80% range, higher for cleaner sized coal. Replace them with your own.
For gas, one mmBtu is 0.252 million kcal, so cost per million kcal = your rate per mmBtu ÷ (0.252 × efficiency). The chart's two gas bars use OGRA's captive industry price of Rs 3,500 per mmBtu from February 2025, and that price plus the Rs 791 grid levy added in March 2025, at 85% efficiency. Gas rates have kept moving since, so check your latest bill; the rate you pay is what counts.
- Duki lump (75%)11,500 Rs per million kcal
- Duki run-of-mine (72%)11,900 Rs per million kcal
- Chamalang lump (75%)11,200 Rs per million kcal
- Sor Range (78%)10,300 Rs per million kcal
- Mach / Harnai (72%)10,900 Rs per million kcal
- Gas at Rs 3,500 (85%)16,300 Rs per million kcal
- Gas at Rs 4,291 with levy (85%)20,000 Rs per million kcal
Coal: Rs a tonne x 1,000 / (kcal per kg x efficiency). Gas: Rs per mmBtu / (0.252 x efficiency). Furnace oil is left out because no current quote is on file; work it with the formula below.
Furnace oil and the extras
Furnace oil carries around 10,000 kcal per kg, though suppliers differ, so ask. With a quote per tonne the sum is price ÷ (kcal per kg × efficiency) × 1,000. A boiler needing 20 million kcal of steam heat a day burns about 4.4 tonnes of Duki lump a day at 75%, or about 133 tonnes in 30 days.
Coal at 15 to 20% ash leaves 150 to 200 kg of ash for every tonne burned, so that boiler makes roughly 0.7 to 0.9 tonnes of ash a day to rake out, store and carry away. Sor Range at 9% ash leaves about 90 kg a tonne, which narrows the gap with a dearer coal. Gas and oil leave almost none. Coal also needs storage, a man or two and attention to smoke in smog season; oil needs heating and tank space; gas needs a reliable supply.
Supply is the larger risk. In past winters the gas companies have cut non-export industry to keep homes supplied, and a gas-only boiler then stands idle. That is the case for keeping a coal boiler beside gas even when gas is cheaper on paper. Coal prices change weekly on the price sheet, so the coal side of the sum can be refreshed as often as you like; redo it before each winter and summer, and whenever a price moves by a tenth. Sindh coal is also available through us; ask for a boiler quote.
Questions people ask
Is coal cheaper than gas for a boiler?
Per unit of heat it usually is, but it depends on your gas rate and boiler efficiency. Work out cost per million kcal for each fuel with your own prices.
How many kcal are in one mmBtu of gas?
About 252,000 kcal, or 0.252 million kcal.
Prices are indicative, per tonne, excluding sales tax, and change week to week. See today's sheet or ask us for a confirmed price.



