Coal merchants, QuettaDelivering to Punjab and Karachi

اردو
0349 4384514Get a quote

Articles / 3 min read

Mixing coal grades: how blending lump with fines or run-of-mine changes cost and heat

Blending coal grades is a weighted average: a mix's heat, ash, sulphur, moisture and price are each coal's value times its share by weight. A blend of 6,000 and 5,000 kcal/kg coal cannot beat 6,000, so the saving in price has to be set against the loss of heat.

Broken coal in small pieces, close-up
Fig. 1Broken coal in small pieces, close-up. Stock photo

Lump with fines

Weights, not buckets. Lump and fines have different bulk densities, so a loader bucket of each is not half and half. Weigh truckloads or use a weighbridge to set the ratio; the coal stockpile weight calculator turns a pile into tonnes. Lump with fines is the common mix because the price gap is widest.

Duki lump blended with coal fines, ex-Quetta
Duki lump : finesHeat (kcal/kg)Ash %Sulphur %Moisture %Price per tonne, Rs
100 : 06,000154.5738,750
90 : 105,900164.67.237,375
80 : 205,800174.67.436,000
70 : 305,700184.77.634,625
50 : 505,500204.8831,875
0 : 1005,000255925,000
Cost of heat in Duki lump blended with coal fines, ex-Quetta
  • 100 : 0 lump : fines6,458 Rs per million kcal
  • 90 : 10 lump : fines6,335 Rs per million kcal
  • 80 : 20 lump : fines6,207 Rs per million kcal
  • 70 : 30 lump : fines6,075 Rs per million kcal
  • 50 : 50 lump : fines5,795 Rs per million kcal
  • 0 : 100 lump : fines5,000 Rs per million kcal

Weighted averages by weight from our price sheet, ex-Quetta prices before delivery.

Other pairings

Some buyers lift a lower grade with a premium coal such as Sor Range or Chamalang for more heat and less ash. The table shows three half and half pairings.

For 100 tonnes of 70 lump and 30 fines at sheet prices the bill is Rs 3,462,500 against Rs 3,875,000 for all lump, a saving of Rs 412,500. The heat falls 5%, by less than the price, so cost per million kcal improves a little. Whether the kiln burns it as well is something only a trial shows.

Half and half blends, ex-Quetta
Blend (50 : 50)Heat (kcal/kg)Ash %Sulphur %Price per tonne, RsRs per million kcal
Chamalang lump + Mach / Harnai6,05015.55.336,2505,992
Sor Range + Duki run-of-mine6,00014.5436,6256,104
Duki lump + Mach / Harnai5,90017.55.335,6256,038
A heap of coal pieces, close-up
Fig. 2A heap of coal pieces, close-up. Stock photo

What the furnace thinks of it

A bhatta fed by hand from the top, as in a zigzag kiln, needs coal that falls evenly into the fire holes and leaves air paths. A modest fines share mixed evenly can work; a heap tipped in one place cannot. A chain or travelling grate boiler runs a bed of set depth, where fines at the bottom choke the air and lump at the top lets it through unevenly, and a fluidised bed takes a narrow size range, so check the maker's specification first. Move the fines share up a tenth at a time and watch the burn.

Blending does not make ash fuse at a higher temperature, so a coal that clinkers still may. Sulphur and ash average and do not vanish: a half and half mix of 4.5% and 6% sulphur coals is 5.25%. Wet fines carry water into the mix, and a mix of different sizes separates when tipped in a pile. Never blend in a coal you have not burned, Sindh lignite included, without a lab report on each part and a small test batch.

Mixing on site

A loader driver tipping buckets in the order he has them is not blending.

  • Set the ratio by weight and convert it to buckets using a weighed sample of each coal.
  • Lay thin alternate layers on a hard floor, then cut through them with the loader.
  • Mix a day's worth at a time, so one mistake costs a day.
  • Cover the blend if rain is forecast.
  • Log the ratio next to fuel burned and output, and send a mixed sample to a lab monthly, as received.

Questions people ask

How do I calculate the heat of a coal blend?

Multiply each coal's heat value by its share by weight and add them. A 70:30 mix of 6,000 and 5,000 kcal/kg coal gives 5,700 kcal/kg.

Can I mix Sindh coal with Balochistan coal?

Test it. Sindh lignite has far less heat and more moisture, so get a lab report on both parts and try a small batch first.

Prices are indicative, per tonne, excluding sales tax, and change week to week. See today's sheet or ask us for a confirmed price.

GradesIn this guide

Grades mentioned

Lumps of black coal, close-up

Balochistan's most traded coal, lump or run-of-mine

Duki coal

Origin
Duki, Loralai, Balochistan
Heat value
5,500–6,500 kcal
Size
Lump or mixed
For
Brick kilns, small industry

FromRs 34,000per tonne, ex-yard

A matte block of coal on a white background

The cheapest heat, for firing and blending

Coal fines (choora)

Origin
Duki, Mach and Harnai fields
Heat value
4,500–5,500 kcal
Size
0–10 mm
For
Brick kiln firing, blending

FromRs 25,000per tonne, ex-yard

Broken coal in small pieces, close-up

Lower-cost steam coal for kilns

Mach and Harnai coal

Origin
Mach (Bolan) and Khost–Harnai, Balochistan
Heat value
5,000–6,500 kcal
Size
0–100 mm
For
Brick kilns, cement (blended)

FromRs 32,500per tonne, ex-yard

QuotationToday's price

Get a confirmed price.

Tell us what you need. We send you a written price within 2 working hours.

You sendCoal, tonnes, city
We replyWritten price in 2 h
We deliverKarachi and Punjab in 2–3 days
A loaded haul truck on a mine road
Coal
Tonnes

Written price within 2 working hours.

Private. Your number is only used to send your price.

Prefer WhatsApp? 0349 4384514

Delivery and guidesAll cities

Keep reading, or get coal delivered.